Xerox DocuColor 5750 - Manual (Page 29)

18 Installing user software on a Windows computer
4. Connect the DocuColor to the same port as your network.
For parallel printing, select the port (LPT1, LPT2, or LPT3) connected to your
parallel cable.
To print to a file, select FILE. Printing to a file is useful if the DocuColor is off-site.
However, if you select the FILE port, you cannot print to a printer until you select a
network or printer port. (In some applications, you can select the FILE port from the
Print dialog box; this is preferable for temporary use since it doesn’t require resetting
the port in the Control Panel.)
5. Click OK.
The Printers window appears again, with the selected port next to the highlighted
printer name in the Installed Printers list box.
6. When you are finished, click OK and then click Close.
Setting up IPX (Novell) printing with Windows 3.1x
T O SET UP IPX (N OVELL ) PRINTING FOR WINDOWS 3.1 X :
1. In the Main group of the Windows Program Manager, double-click the Windows Setup
icon.
2. Choose Change System Settings from the Options menu.
Double-click here