Yamaha DSP-AX861SE - Manual (Page 89)

87
En
Remote control features
AD
V
ANCED
OPERA
T
ION
English
■ Clearing a learned function
You can clear the function learned for a certain button in
each control area.
1
Set the operation mode selector to L
AMP or
L
SOURCE and then press an input selector
button ( B), or to select the input area
containing the function you want to clear.
The selected component name appears in the display
window (
J ).
2
Press T
LEARN using a ballpoint pen or
similar object.
“LEARN” and the selected component name
(ex. “DVD”) appear alternately in the display window
(
J ).
• Do not press and hold TLEARN. If you hold it down for
more than 3 seconds, the remote control enters the remote
control code setting mode.
• If you do not complete each of the following steps within
30 seconds, the learning mode will be automatically
canceled. In this case, start over from step 2.
3
Press and hold T
CLEAR using a ballpoint
pen or similar object and then press the
button you want to clear for about 3 seconds.
“C;OK” appears in the display window (
J ) if
clearing was successful. Once “C;OK” appears in the
display window (
J ) on the remote control, release
the ballpoint pen or similar object used to press
T CLEAR to exit the clearing mode. The remote
control returns to the learning mode.
y
• If you continuously want to clear another function, repeat
step 3.
• If you continuously want to clear another function for
another component, press JSELECT k / n to select the
input area, then repeat step 3.
• Once you clear a learned function, the button reverts to the
factory setting (or to the manufacturer setting if you have
set remote control codes).
4
Press T
LEARN again to exit.
• “C;NG” appears in the display window ( J) on the remote
control if clearing was unsuccessful. In this case, start over from
step 2.
• “ERROR” appears in the display window ( J) on the remote
control if you press more than one button simultaneously.
Notes
V-AUX/DOCK
DTV/CBL VCR DVR DVD
TUNER MD/CD-R CD
PHONO MULTI CH IN
TV
SOURCE
AMP
TV
SOURCE
AMP
or
LEARN
Notes
CLEAR LEARN RENAME
MODE- PTY SEEK- START