Yamaha DSP-AX861SE - Manual (Page 85)

83
En
Remote control features
AD
V
ANCED
OPERA
T
ION
English
3
Press D k / n to select and enter a character.
Pressing D n changes the character as follows:
A to Z, 1 to 9, 0, + (plus), – (hyphen), ; (semicolon),
/ (slash), and space.
Pressing
D k changes the characters in reverse order.
4
Press D h to move the cursor to the next
position.
y
Press Dl to move the cursor to the previous position.
5
Press D
ENTER to set the new name.
“OK” appears in the display window ( J ) on the
remote control if renaming was successful.
“NG” appears in the display window(
J ) on the
remote control if renaming was unsuccessful. In this
case, start over from step 3.
y
If you continuously want to rename another input area, press
the input selector button (B),
, or , or press
JSELECT k / n repeatedly to select the component, then
repeat steps 3 through 5.
6
Press T
RENAME again to exit the renaming
mode.
“ERROR” appears in the display window ( J) on the remote
control if you press a button not indicated in the respective step,
or when you press more than one button simultaneously.
y
This feature is useful when you change the input or output
assignment for digital jacks and component video input jacks.
Refer to “Input rename” on page 71.
The macro programming feature makes it possible to
perform a series of operations with the press of a single
button. For example, when you want to play a CD,
normally you would turn on the components, select the
CD input, and press the play button to start playback. The
macro programming feature lets you perform all of these
operations simply by pressing the CD macro button. The
buttons listed as macro buttons below are factory set with
macro programs. You can also program your own macros
(see page 85).
■ MACRO operations
1
Set the T
MACRO ON/OFF selector to ON.
2
Press the desired macro button.
3
Set the T
MACRO ON/OFF selector to OFF
when you finish to using the macro
programming operation.
• While the remote control is running a macro program, it does
not accept any other operation until it has completed running
the program (the transmission indicator stops flashing).
• Continue to aim the remote control at the component the macro
is operating until the macro operation is complete.
Note
ENTER
A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E
PRESET/CH
RENAME
Macro programming features
Notes
V-AUX/DOCK
AV TV
1 2 3 4
DTV/CBL VCR DVR DVD
TUNER MD/CD-R CD
PHONO MULTI CH IN
POWER POWER
SCENE
POWER STANDBY
ON OFF CLEAR LEARN RENAME MACRO
REC
FREQ/TEXT EON MODE- PTY SEEK- START
Macro buttons
MACRO ON/OFF MACRO
ON OFF CLEAR LEARN MACRO
ON OFF CLEAR LEARN MACRO