Yamaha DSP-AX861SE - Manual (Page 26)

24
En
Connections
■ AC OUTLET (SWITCHED)
Use this outlet to supply power to any connected components. Connect the power cable of your other components to this
outlet. Power to this outlet is supplied when this unit is turned on. However, power to this outlet is cut off when this unit
is set to the standby mode. For information on the maximum power of the total power consumption of the components
that can be connected to this outlet, see “Specifications” on page 103.
The power to AC OUTLET of this unit is not cut off while this unit is charging connected iPod even when this unit is in the standby
mode. When this unit completes charging or the iPod is disconnected, the power is cut off automatically when this unit is in the standby
mode.
Connecting the power cable
AC OUTLET
To the AC wall outlet
Note
Memory back-up
The memory back-up circuit prevents the stored data from being lost even if this unit is in the standby mode. However,
the stored data will be lost in case the power cable is disconnected from the AC wall outlet or if the power supply is
cut off for more than one week.