Yamaha HTR-6160 - Manual (Page 89)

85
En
Customizing this unit (MANUAL SETUP)
AD
V
ANCED
OPERA
T
ION
English
Use this feature to manually adjust the basic speaker
settings. Most of the “BASIC MENU” parameters are set
automatically when you run the automatic setup.
y
Set “TEST TONE” to “ON” to output the test tone for the
“SPEAKER SET”, “SP LEVEL” and “SP DISTANCE”.
■ Speaker settings
A)SPEAKER SET
y
To select the desired parameter, press 8k / n repeatedly.
Extra speakers assignment EXTRA SP ASSIGN
Selects the function of the speakers connected to the
EXTRA SP terminals.
• This parameter shares the value with the “EXTRA SP
ASSIGN” parameter in “AUTO SETUP” (see page 33).
• If you select “ON” in “BI-AMP” (see page 109), you cannot
select “PRESENCE” or “ZONE2” in “EXTRA SP ASSIGN”.
• After changing the “EXTRA SP ASSIGN” setting, carry out
“AUTO SETUP” again (see page 32).
LFE/bass out LFE/BASS OUT
Use this feature to select the speakers that output the LFE
(low-frequency effect) and the low-frequency signals.
LFE signals output
Low-frequency signals output
*1 Output(s) the low-frequency signals of the front
channels and other speakers set to “SMALL”.
*2 Always output the low-frequency signals of the front
channels.
*3 Output the low-frequency signals if the speakers are set
to “LARGE”.
*4 Outputs the low-frequency signals of the speakers set to
“SMALL” or “NONE”.
1 BASIC MENU
Choice Descriptions
ZONE2 Select this setting when you use the Zone 2
speakers (see page 104).
FRONT B Select this setting when you use another front
speaker system in the main zone (see page 43).
ZONE B Select this setting when you use another front
speaker system in another room (see page 43).
PRESENCE Select this setting when you use the presence
speakers (see page 13).
NONE Select this setting when you do not use the
EXTRA SP terminals.
Notes
[ ]/[ ]:
[ENTER]:
[ p
1 BASIC MENU
A)SPEAKER SET
B)SP LEVEL
C)SP DISTANCE
D)TEST TONE
Up/Down
Enter
.
X
X
X
X
X
X
X
X
X
XXXX[ ]/[ ]:Up/DownXXXXX
XXXX[
p]/[[]:EnterXXXXXXX
X
[ p
A)SPEAKER SET
EXTRA SP ASSIGN
ZONE2 >FRONT B
ZONE B PRESENCE
NONE
ZONE2 SET
Not Available
Choice
Subwoofer(s) and speakers
Subwoofer(s)
Front
speakers
Other
speakers
BOTH Output No output No output
SWFR Output No output No output
FRONT No output Output No output
Choice
Subwoofer(s) and speakers
Subwoofer(s)
Front
speakers
Other
speakers
BOTH *1 *2 *3
SWFR *4 *3 *3
FRONT No output *1 *3
A)SPEAKER SET
LFE/BASS OUT
SWFR FRONT >BOTH