Yamaha HTR-6160 User Manual
Page 86
82
En
Customizing this unit (MANUAL SETUP)
Input menu
4 INPUT MENU
Some parameters described below may not be available for all input sources and some parameters are only available for specific input
sources.
Option menu
5 OPTION MENU
Note
Parameter
Functions
Page
I/O ASSIGNMENT
Assigns the input/output jacks according to the component to be used if the initial settings of
this unit do not correspond to your needs.
INPUT RENAME
Changes the name of the input source that appears in the OSD and in the front panel display.
94
VOL. TRIM
Adjusts the level of the signal input at each jack.
DECODER MODE
Switches the decoder activation mode. You can designate the reassigned digital input jacks for
DTS signals.
STANDBY CHARGE
Selects whether this unit charges the battery of the stationed iPod or not when this unit is in the
standby mode (see page 29).
PARENTAL LOCK
(U.S.A. and Canada
models only)
Sets the SIRIUS Parental Lock code number and the channel lock configuration (see page 65)
94
START PAIRING
Pair the connected Yamaha Bluetooth adapter (such as YBA-10, sold separately) with a
Bluetooth component (see page 70).
BGV
Selects the video source played back in the background of the sources input at the MULTI CH
INPUT jacks.
INPUT CH
Selects the number of channels input from an external decoder.
FRONT
Selects the analog jacks at which the front channel signals from an external decoder are input
when you set “INPUT CH” to “8CH”.
Menu
Parameter
Functions
Page
A)DISPLAY SET
DIMMER
Adjusts the brightness of the front panel display.
OSD SHIFT
Adjusts the vertical position of the OSD.
96
OSD-SOURCE
Sets the amount of time to display the SIRIUS Satellite Radio
information, XM Satellite Radio information, or iPod menu in the
video monitor after you perform a certain operation.
OSD-AMP
Sets the amount of time to display the status information screen after
you perform a certain operation.
FL SCROLL
Selects the mode to display the SIRIUS Satellite Radio information,
XM Satellite Radio information, or iPod menu in the front panel
display.
B)VIDEO SET
VIDEO CONV.
Selects whether to convert the video signals input at the VIDEO,
S VIDEO, and COMPONENT VIDEO jacks.
C)MEMORY GUARD
—
Prevents accidental changes to sound field program parameter values
and other system settings.