Yamaha HTR-6160 - Manual (Page 76)

ADVANCED SOUND CONFIGURATIONS
72
En
You can enjoy good quality sound with the initial factory
settings. Although you do not have to change the initial
factory settings, you can change some of the parameters to
better suit the input source or your listening room.
You cannot change the sound field parameter values when
“MEMORY GUARD” in “OPTION MENU” is set to “ON” (see
page 97). If you want to change the sound field parameter values,
set “MEMORY GUARD” to “OFF”.
1
Turn on the video monitor connected to this
unit.
2
Press 5
AMP and then SPARAMETER on
the remote control.
The following screen is shown in the OSD.
3
Press B
PROG l / h repeatedly to select
the desired sound field program you want to
adjust.
4
Press 8k / n to select the desired sound
field parameter and then 8l / h to change
the selected sound field parameter value.
• Press 8h to increase the value.
• Press 8l to decrease the value.
y
• For details about the function and control range of each sound
field parameter, see page 74.
• When you set a sound field parameter to a value other than the
initial factory settings, an asterisk mark (*) appears by the
sound field parameter name in the OSD.
• Repeat steps 3 and 4 as necessary to change other sound field
program parameter settings.
• The available sound field parameters for some of the sound field
programs may be displayed on more than one page in the OSD.
In this case, press 8k / n to scroll through pages.
• To initialize the parameters of the selected sound field program,
press 8n repeatedly to select “INITIALIZE” and then press
8h. Once the confirmation screen appears in the OSD, press
8h to confirm or 8l to cancel the initialization.
5
Press S
PARAMETER to turn off the sound
field parameter screen.
Advanced sound configurations
Changing sound field parameter
settings
Note
Sound field program category
Sound field parameters Sound field parameter
values
[ p]/[[]:
MOVIE 1/2
Sci-Fi
SUR.;;PLIIx Movie
DSP LEVEL;;;;;0dB
P.INIT.DLY;;;16ms
P.ROOM SIZE;;;1.0
S.INIT.DLY;;;16ms
S.ROOM SIZE;;;1.0
Select
. Cursor
[ []:
MOVIE 2/2
Sci-Fi
SB INIT.DLY;;15ms
SB ROOM SIZE ;;1.0
DIALOG LIFT;;;;;0
INITIALIZE
Initialize
.