ZyXEL Communications Auto Configuration Server Vantage Access - Manual (Page 12)

ENGLISH
12
1 you need the Authentication Code (AC) to get a license key.
Copy it from this screen and paste it to a text file on your
computer or write the AC down.
2 Click Continue.
3 The Active Vantage Access with license screen appears.
Contact your local customer support and tell them the AC.
Then you will get a license key. Enter it in this screen and click
Apply.
6 Specifying a Download Server
You must specify a server to store device firmware and configuration files and perform automatic
remote firmware upgrades or configuration restores on the managed devices.
1 Click the System Manager icon in the control panel.
2 Click Download Server in the navigation panel to
display the configuration screen.
3 In the IP Address field, enter the IP address of the
HTTP server in dotted decimal notation.
"
If the HTTP server and Vantage Access are installed on the same computer, you
must use a different port number for the HTTP server and specify the port
number. For example, if the HTTP server (192.168.100.1) is using port 8080,
then enter “192.168.100.1:8080” in the IP Address field.
4 Set the User Name and Password fields to access the HTTP server. If you have changed the
default settings (“zyxel” and “1234”) during the installation process, enter the new account
information. The account user name and password are case sensitive.
5 Click Apply to save the settings.
7 Registering a Device
You must register one or multiple compatible devices to Vantage Access to allow remote
management.
• To register one device, configure the device information in the Edit an XML file and upload to Van-
tage Access. See Section 7.1 on page 13 and Section 7.2 on page 13 .