ZyXEL Communications PLA-407 - Manual (Page 63)

Chapter 7 Powerline Network Setup Tutorial
PLA-407 User’s Guide
63
5 You are now ready to extend your Powerline network or set up a second network.
• See Section 7.0.4 on page 63 to add a new Powerline adapter to your
network.
• See Section 7.0.5 on page 65 to set up a second network with your new
adapters.
• See Section 7.0.6 on page 67 to set up a second network with your existing
adapters.
7.0.4 Adding a Powerline Adapter
This section shows you how to add a new Powerline adapter to expand your
existing network.
The figure below shows the family computer (A) with Internet access on a
Powerline network. Expand the network by adding a new Powerline adapter
connected to a printer (B).
Figure 38 Add a Printer to Your Powerline Network
Note: You do not need to know the network name of the new adapter to add it to your
network.
1 Connect your computer to the Powerline adapter you want to add to your network
and open the PLA-4xx Series Configuration Utility (see
Section 7.0.3 on page
62 ).
A
B