Yamaha CBX-D5 - Manual (Page 14)

8 Chapter 4 : Controls & Connections 8 Chapter 4 : Controls & Connections 8 Chapter 4 : Controls & Connections
4 Controls & Connections
Front panel
1
POWER switch
Used to turn the power on and off. Press once to switch on, press again to switch off.
2
SOURCE indicators
Indicates the input selected for recording: AES/EBU, Y2, CD/DAT, or ANALOG. The
source input selection is made by the controlling software.
3
REC FREQ indicators
Indicates the selected sampling frequency for recording: 48kHz, 44.1kHz, 32kHz, and
22.05kHz (analog inputs only). The sampling frequency selection is made by the
controlling software.
4
PB FREQ indicators
Indicates the sampling frequency of the digital audio data that is being output by the
CBX-D5: 48kHz, or 44.1kHz. The playback sampling frequency setting is made by the
controlling software.
When the CBX-D5 is used with an external word clock, the digital outputs will operate at
the same frequency as the external word clock and that frequency will not be indicated by
the “PB FREQ” indicators.