XM Satellite Radio R-672 User Manual
Page 53
53
Continued
When selecting the “REF” (Dolby Virtual Speaker
Reference) mode
2 SP : When using 2 front speakers only.
3 SP : When using 2 front and center speakers.
When selecting the “WIDE” (Dolby Virtual Speaker
Wide) mode
2 SP : When using 2 front speakers only.
3 SP : When using 2 front and center speakers.
4 SP : When using 2 front and 2 surround speakers.
5 SP : When using 2 front, center and 2 surround speakers.
1.
Press the CURSOR UP(
)/DOWN(
) buttons to select the “DOLBY VS”, then press the ENTER button.
2.
Press the CURSOR UP(
)/DOWN(
) buttons to select the desired Dolby Virtual Speaker mode.
3.
Press the CURSOR LEFT(
)/RIGHT(
) buttons to select the desired speaker layout.
• Each time the CURSOR UP(
)/DOWN(
) buttons are pressed,
“REF” (Dolby Virtual Speaker Reference) mode or “WIDE” (Dolby
Virtual Speaker Wide) mode is selected.
4.
Repeat the above steps 2 and 3 to select the desired speaker layout for another Dolby Virtual Speaker mode.
When selecting the DOLBY VIRTUAL SPEAKER
• You can select the speaker layout to be used actually for each Dolby Virtual Speaker mode.
Note : The speaker layout settings are valid only when listening in a Dolby Virtual Speaker mode.
Note: When the speakers are set to "N" (None), the corresponding speaker layouts cannot be selected.
ENGLISH