XM Satellite Radio R-672 - Manual (Page 25)

25
• The "1" of "REF 1" indication flickers for several
seconds.
• You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you
want.
Memorizing the adjusted channel levels
1.
After performing the steps 1~4 in "Adjusting the current
channel level" procedure on page 24, press the
(MEMORY/) ENTER button.
2.
Select the desired one of REF 1 and REF 2.
3.
Confirm your selection.
• If the preset memory disappears, perform the
above step 1 again.
• The adjusted channel levels have now been memorized
into the selected memory.
• “CAL” (or “REF 1", etc.) is displayed for several
seconds.
• If the channel level mode display disappears, press this
button again.
Recalling the memorized channel levels
1.
Press the CHANNEL LEVEL button.
2.
Select the desired one of REF 1 and REF 2.
• Then the channel levels memorized into the selected
preset memory are recalled.
ENGLISH