beautypg.com

Setting the system – XM Satellite Radio R-672 User Manual

Page 37

background image

37

SETTING THE SYSTEM

1.

Press the CURSOR UP(

)/DOWN(

) buttons to

select the desired item.

2.

Press the CURSOR LEFT(

)/RIGHT(

) buttons to

set the selected item as desired.

• When connecting one surround back speaker and the subwoofer without built-in amplifier to the SURROUND BACK LEFT and

RIGHT channels respectively, you should assign the power amplifier to “SB+W” (Surround Back+Subwoofer). (For details on
speaker connection, refer to "CONNECTING SPEAKERS" on page 9.)

SB (Surround Back) : To assign the power amplifier to the surround back left and right channels.

SB+W (Surround Back+Subwoofer) : To assign it to the surround back and the subwoofer channels.

When selecting the AMP ASSIGN

When selecting the SUBWOOFER mode

• "SW

" mode is valid only when "FRONT" and "CENTER" are set to "L" and "SUB-W" is set to "Y" on the SPEAKER SETUP

menu. (For details, refer to "SETTING THE SPEAKER SETUP" on page 41.)

NORM : When the low frequency signals of channels set to "L" are reproduced from those channels only.

In this mode, the low frequency signals that are reproduced from the subwoofer channel is only the low frequency
signals of LFE (from the multi-channel sources that contains LFE (Low Frequency Effects) channel, also called the ".1"
channel) and the channels set to "S".

SW

: When the low frequency signals of channels set to "L" are reproduced simultaneously from those channels and the

subwoofer channel.

In this mode, the low frequency range expands more uniformly through the room, but depending on the size and shape
of the room, interference may result in a decrease of the actual volume of the low frequency range.

• AMP (AMP ASSIGN) : To assign the power amplifier to the surround back left and right channels or the surround back and

the subwoofer channels.

• SW (SUBWOOFER) : To select the desired subwoofer mode.

• TONE : To adjust the tone (bass and treble) as desired.

• C-EQ (CINEMA EQ) : To select the desired cinema EQ mode.

• RETURN : To return to the previous menu.

ENGLISH