Yamaha CD Recordable/Rewritable Drive CRW-70 - Manual (Page 28)

19
4 44 4
Connect the AC adapter provided to the DC IN connector of the
drive.
Insert the AC adapter cable so that the arrow on the cable plug faces
upwards.
5 55 5
Connect the power cable provided to the AC adapter (
➀ ➀ ➀ ➀
).
Connect the other end of the power cable to the AC outlet (
➁ ➁ ➁ ➁
).
• Electrical plugs/sockets vary according to country/region.
• Only operate the drive with the AC adapter provided.
• The AC adapter may become hot during use. This is not a malfunction.
• When the AC adapter is connected to an AC outlet it continues to consume about
0.8 W of power even if the drive is turned off. Unplug the power cable from the
AC outlet when you do not intend to use the CRW-70 drive for a long time.
Notes
AC adapter cable plug (provided)
Arrow
DC IN connector
Power cable
(provided)
➀
➁