Yard-Man 247.37979 - Manual (Page 13)

13
BAGGING GRASS CLIPPINGS
This mower can bag grass clippings. Follow steps 1 through 3 to ready the mower for bagging.
Step 1. Remove wing nuts holding mulching baffle
or side discharge chute in place. Then
remove plug or discharge chute.
Step 2. Replace with bagging adapter. Attach
using wing nuts. Be sure that inner lip of
attachment goes under the edge of the deck.
Step 3. Lift chute door and slide bag onto adapter.
Bagging adaptor Mulching baffle Side-discharge chute
Chute Door
NOTE: The chute door has been
designed to move the starter
rope out of the way of the bag
when the chute door is opened.