ZyXEL Communications P-1100 - Manual (Page 62)

Prestige 1100 Internet Access Router
6-4 IPX Configuration
6.3 IPX Ethernet Setup
From Menu 3 - Ethernet. Setup, select option 3. Novell IPX Setup from the appropriate LAN to go to
Menu 3.3 - Novell IPX Ethernet Setup as shown in Figure 6-3.
Figure 6-3 Menu 3.3 - Novell IPX Ethernet Setup
The following Table 6-1 describes the Novell IPX Ethernet Setup Menu.
Table 6-1 Novell IPX Ethernet Setup Fields
Field Description Options
Seed Router Determine if your Prestige 1100 is to act as a seed router. [Yes/No]
Frame Type Enable/Disable the individual frame type. Remember to enable only
the ones that are actually used on your network.
[802.2]
[802.3]
[Ethernet II]
[SNAP]
IPX Network
# If your Prestige 1100 is a seed router, enter a unique network number
for each frame type enabled.
Press [ENTER] at the message [Press ENTER to Confirm] to save your configuration, or press [ESC] at
any time to cancel.
Menu 3.3 - Novell IPX Ethernet Setup
Seed Router= No
Frame Type 802.2= Yes
IPX Network #= N/A
Frame Type 802.3= No
IPX Network #= N/A
Frame Type Ethernet II= No
IPX Network #= N/A
Frame Type SNAP= No
IPX Network #= N/A
Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.