Pppoa dialup connection setup -15, 3 pppoa dialup connection setup – ZyXEL Communications 630 User Manual

Page 27

Text mode
Original mode

Prestige 630 ADSL USB Modem

Step 8. With OS 8.6 only, click the Protocol tab and make sure that the Use Protocol field is set to

PPP. Select the Connect automatically when starting TCP/IP applications, Allow error
correction and compression in modem and Use TCP header compression check boxes. Click
OK. Go to section 2.3 to set up a dial-up connection.

Figure 2-9 Remote Access: Protocol Tab (OS 8.6 Only)

2.3 PPPoA Dialup Connection Setup

Follow these steps to create a dial-up connection.
Step 1. Use one of the following methods to open Remote Access.

• Click the Apple icon, Control Panels and then Remote Access (see Figure 2-6).

Configuring Your Macintosh for Internet Access

2-15