Yamaha RX-V3900 - Manual (Page 41)

37
En
Playback
BA
S
IC
OPERA
T
ION
English
Use this feature (audio input jack select) to switch the
input jack assigned to an input source when more than one
jacks are assigned to an input source.
1
Rotate the C
INPUT selector (or press one
of the input selector buttons (3)) to select
the desired input source.
2
Press D
AUDIO SELECT and then rotate
M
PROGRAM selector (or set the operation
mode to F
AMP and then press FAUDIO
SEL repeatedly) to select the desired audio
input jack select setting.
y
You can configure the default audio input jack select setting
with “Audio Select” (page 85).
This feature is not available if no digital input jack is assigned
to the selected input source in “I/O Assignment” (page 98).
“HDMI” is available only when an HDMI input jack is
assigned.
Use this feature to select the component connected to the
MULTI CH INPUT jacks (page 22) as the input source.
Rotate the C
INPUT selector on the front panel
to select “MULTI CH” (or press 3
MULTI).
y
You can configure the multi channel input settings with
“MULTI CH” (page 85).
Sound field programs cannot be selected when “MULTI CH” is
selected as the input source.
Use this feature to select the HDMI OUT jack(s) to output
the input signals.
Set the operation mode selector to F
AMP and
then press R
HDMI OUT on the remote control
repeatedly to select the desired setting.
The HDMI output setting changes as follows.
y
You can select the HDMI OUT jack at which HDMI control
signals are output with “Control Monitor” (page 95).
Selecting audio input jacks
(AUDIO SELECT)
AUTO Automatically selects input signals in the
following order:
(1) HDMI
(2) Digital signals
(3) Analog signals
HDMI Selects only HDMI signals. When HDMI
signals are not input, no sound is output.
COAX/OPT Automatically selects input signals in the
following order:
(1) Digital signals input at the COAXIAL jack.
(2) Digital signals input at the OPTICAL jack.
When no signals are input, no sound is output.
ANALOG Selects only analog signals. If no analog
signals are input, no sound is output.
Note
DOCK V-AUX VCR DVR CBL/SAT DVD BD/HD DVD MD/CD-R TV CD PHONO MULTI CH TUNER XM SIRIUS
A . S E L : A U T O
USB
NET
Selected audio input jack
select setting
Available input sources
Selecting the multi-channel input
component
Note
Selecting the HDMI OUT jack
OUT 1+2 Outputs the signals at both the HDMI OUT 1
and HDMI OUT 2 jacks simultaneously.
OUT 1 Outputs the signals at the HDMI OUT 1 jack.
OUT 2 Outputs the signals at the HDMI OUT 2 jack.
OFF Does not output any signals at the HDMI OUT
1 and HDMI OUT 2 jacks. Select this setting
when you do not use the video monitor
connected to one of the HDMI OUT jacks.
OUT1+2 OUT1
OUT2 OFF