ZyXEL Communications P-2304R-P1 Series - Manual (Page 36)

Chapter 2 Introducing the Web Configurator
P-2304R-P1 Series User’s Guide
36
1 Make sure the POWER LED is on and not blinking.
2
P ress and hold the RESET button for five to ten seconds. Release the RESET button
when the POWER LED begins to blink. The default settings have been restored.
If the ZyXEL Device restarts automatically, wait for the ZyXEL Device to finish restarting,
and log in to the web configurator. The password is “1234”. You have finished.
If the ZyXEL Device does not restart automatically,
di sconnect and reconnect the ZyXEL
Device’s power. Then, follow the directions above again.
2.4 Web Configurator Main Screen
Figure 8 Main Screen
As illustrated above, the main screen is divided into these parts:
• A - title bar
• B - navigation panel
• C - main window
• D - status bar
A
B
C
D