ZyXEL Communications P-2304R-P1 Series - Manual (Page 198)

Chapter 19 Logs
P-2304R-P1 Series User’s Guide
198
19.2.2 Log Settings Screen
Use this screen to configure where the ZyXEL Device sends logs and alerts, the schedule for
sending logs, and which logs and alerts are sent or recorded.
To access this screen, click Maintenance > Logs > Log Settings.
Figure 110 Maintenance > Logs > Log Settings
Each field is described in the following table.
Table 89 Maintenance > Logs > Log Settings
LABEL DESCRIPTION
E-mail Log
Settings
Mail Server Enter the server name or the IP address of the mail server the ZyXEL Device
should use to e-mail logs and alerts. Leave this field blank if you do not want to
send logs or alerts by e-mail.