Tape 1 or tape 2 playback, E-32, Tape deck operation – Yamaha GX-70 User Manual
Page 44: Press the tape 1/2 input selector button, Press the stop button
E-32
1
PLAYBACK
2
REC/PLAYBACK
EJECT
OPEN/CLOSE
DISC CHANGE
Active Servo
Technology
1
2
3
DISC
PROGRAM
USER
VOLUME
DOWN
UP
MEMORY
DOWN
UP
REC/PAUSE
MODE
HOUR
MIN
NORMAL
DUBBING
HIGH
MEMORY
TIME ADJ
DOLBY NR
AUTO/MAN’L
TIMER
TIMER REC
MUSIC
POWER
PHONES
PRESET/TUNING/BAND
A/B/C/D/E
RANDOM
REPEAT
EDIT
DISPLAY
CD
INPUT
INPUT
TAPE 1/2
START
MODE
FREQ PS/PTY/RT/CT
PTY SEEK
EJECT
MINI COMPONENT SYSTEM
GX–70
2
1
Tape 1 or tape 2 playback
1
Press the TAPE 1/2 input selector button.
2
Open the deck 1 or deck 2 cassette compartment by
pressing the EJECT button.
3
Load a tape into the deck 1 or deck 2 cassette
compartment, and close the lid panel completely by
pressing the panel until it clicks.
* If you have loaded two tapes into both the cassette
compartments, select either the tape 1 or tape 2 which
you want to play back by pressing the TAPE 1/2 input
selector button on the front panel or the TAPE 1/2
button on the remote control transmitter confirming it on
the display.
4
Use the Dolby NR system by pressing the DOLBY NR
button so that “
B” lights up on the display, if the tape
has been recorded with Dolby noise reduction. If not so,
set the DOLBY NR button so that “
B” does not light up.
*
For details, refer to the “Dolby B Type Noise
Reduction” on page 31.
5
If necessary, switch the reverse mode to the desired one
by pressing the reverse MODE selector button so that the
corresponding indicator lights up.
The reverse MODE selector button can be operated before
or during playback, and changes tape playback as follows:
6
Press the play
button on the remote control transmitter
to listen to side A, or the play
button for side B.
*
When using the play
button on the front panel:
Pressing the
button once begins playback in the
direction currently selected. Pressing the play button
once more changes the tape running direction
and begins playback.
*
The play direction indicator on the display shows the
currently selected tape direction.
To stop playback
Press the stop
button.
TAPE DECK OPERATION
2
6 2
4 5 1, 3
3
1
1
2
2
3
3
4
4
5
5
TIME
A
DISC SKIP
PROG
B
TAPE
C
EDIT
D
+
I0
E
OPEN/CLOSE
RANDOM
REPEAT
MODE
6
6
7
7
8
8
9
0
CD
PRESET
TUNER
TAPE
STOP
STOP
PLAY/PAUSE
PLAY
PLAY
REC/PAUSE
TAPE 1/2
LEVEL
MUSIC
TEST
FLAT
CENTER/REAR
/DELAY
PROGRAM
USER
POWER
INPUT
SLEEP
VOLUME
1
3
6
Side A only
Side B only
Side A
→
Side B
(Repeats 8 times)
Starts from side A.
Side A
→
Side B
(Repeats 8 times)
Starts from side B. (Side A is
not played at the first time.)
Moves slowly in the current tape running
direction during playback.
Play direction indicator