Zenoah EBZ3000RH - Manual (Page 9)

GB-9
G
B
EBZ3000RH
6. Set up
(1) Flexible hose
(2) Band
(3) Cabling
FLEXIBLE HOSE and SWIVEL JOINT
1. Connect the blower and swivel joint with flexible hose.
Clamp both ends of the flexible hose securely with
the hardware supplied with the unit.
NOTE
A light lubricant may be used to ease assembly of
flexible pipe to blower elbow.
CONTROL HANDLE
• Set up the handle holder to the swivel joint and tighten
the screw on the handle holder.
CABLING
1. First, lightly tighten the hose in the middle of it by put-
ting the band through the hole (a).
2. Next, lightly tighten the cabling by putting the band
through the hole (b).
(1) Handle holder
(2) Swivel joint
(3) Screw
(1) Flexible hose
(2) Swivel joint
(3) Clamp (Large)
(4) Clamp (Small)
(1)
(4)
(3)
(2)
BLOW PIPES
• Connect the swivel joint, straight pipe and pipe end.
Push the pipes together and turn them so they lock in
relation to one another until the connection is locked.