Zenoah EBZ3000RH - Manual (Page 2)

GB-2
EBZ3000RH
DESIGNATION : BLOWER (Back-pack garden blower)
MANUFACTURER : Husqvarna Zenoah Co., Ltd.
MODELS : EBZ3000RH
SERIAL NUMBERS DATING : 2010 and onwards
(The year is clearly stated on the rating plate,
followed by the serial number)
This declaration conform with :
DIRECTIVE 2006/42/EC of 17 May, 2006
(The following standards have been applied: ISO 12100-1,-2, FprEN 15503)
DIRECTIVE 2004/108/EC of December 15, 2004
(The following standards have been applied: EN 61000-6-1, EN 55012 (CISPR 12))
DIRECTIVE 2000/14/EC of 8 May, 2000
conformity assessment procedure followed ANNEX V
(The following standards have been applied: ISO 11094)
DIRECTIVE 97/68/EC of December 16, 1997
2002/88/EC of December 9, 2002
Date : 29 December 2009
Signature :
Kiyoshi Honda
General Manager, Development Center
Authorised representative :
Husqvarna AB
SE-561 82 Huskvarna, Sweden
Person authorised to compile the technical file :
Bo R Jonsson
SE-561 82 Huskvarna, Sweden
EC DECLARATION OF CONFORMITY
(Applies to Europe only)
The undersigned manufacturer,
Husqvarna Zenoah Co.,Ltd.,
1-9, Minamidai, Kawagoe, Saitama, Japan,
declares under sole responsibility that the following products referred to in this declaration
conform with the requirement of the following COUNCIL’S DIRECTIVE.
The products referred to are :
WARNING!!!
RISK OF DAMAGING HEARING
Wear head, eye and ear protection.
* Specifications are subject to change without notice
1) Noise emissions in the environment measured as sound power (L
WA ) in conformity with EC directive 2000/14/EC.
Reported soundpower level for the machine has been measured with the original attachment.
The difference between guaranteed and measured sound power is that the guaranteed sound power also includes disper-
sion in the measurement result and thevariations between different machines of the same model according to Directive 2000/
14/EC.
Reported data for equivalent sound pressure level (L
pAeq ) at the operator’s ear for the machine has a typical statistical disper-
sion (standard deviation) of 1 dB (A), and is calculated as the time-weighted energy total for sound pressure levels under
various working conditions with the following time distribution: 1/7 idling and 6/7 max speed.
2) Reported data for equivalent vibration level (a
hv,eq
) at the control handle has a typical statistical dispersion (standard devia-
tion) of 1 m/s 2 .
SOUND LEVEL 1) VIBRATION LEVEL 2)
measured guaranteed
a
hv, eq
MODEL
EBZ3000RH 29.5 cm 3 99.6 dB(A) 100 dB(A) 91 dB(A) 2.4 m/s 2
DISPLACEMENT
ISO 22868
L
pAeq
2000/14/EC
L
WA
ISO 22867 (prEN 15503)
EXPLANATION OF SYMBOLS AND SAFETY WARNINGS
APPROVAL NUMBER OF CE EXHAUST EMISSION REGULATION (2002/88/EC)
e13*97/68SH2G3*2002/88*0098*04