Yamaha WA66540 - Manual (Page 19)

Front & Rear Panels
MG32/14FX, MG24/14FX 19
L
■ CHANNEL I/O Section
1 Monaural-Channel Input Jacks
(MG32/14FX: CHs 1 to 24, MG24/14: CHs 1 to 16)
• INPUT A
These are balanced XLR input jacks.
• INPUT B
These are balanced phone input jacks. You can connect either
balanced or unbalanced phone plugs to these jacks.
On any given channel, you may use either INPUT A
or INPUT B, but not both. If you connect to both of
these inputs, only INPUT B will be effective.
2 INSERT I/O Jacks
These are unbalanced TRS (tip, ring, sleeve) phone-type bidi-
rectional jacks. You can use these jacks to connect channels to
devices such as graphic equalizers, compressors, and noise fil-
ters.
Connection to an INSERT I/O jack requires a spe-
cial separately-sold insertion cable such as illus-
trated below.
3 Stereo-Channel Input Jacks
(MG32/14FX: CHs 25/26, 27/28, 29/30, 31/32)
(MG24/14FX: CHs 17/18, 19/20, 21/22, 23/24)
• Phone jacks
(MG32/14FX: CHs 25/26, 27/28, 29/30, 31/32)
(MG24/14FX: CHs 17/18, 19/20, 21/22, 23/24)
These are unbalanced phone input jacks. You can use each
pair of jacks to input a stereo signal. Feed the L signal into
the odd-numbered channel, and the R signal into the
even-numbered channel.
• RCA-pin jacks
(MG32/14FX: CHs 29/30, 31/32)
(MG24/14FX: CHs 21/22, 23/24)
These are unbalanced RCA-pin input jacks. You can use each
pair of jacks to input a stereo signal. Feed the L signal into
the odd-numbered channel, and the R signal into the
even-numbered channel.
• Where a channel provides both a phone jack and
an RCA pin jack, you may use either one of these
jacks but you may not use both at the same time.
Please connect to only of these jacks on each
channel.
• Some of the phone jacks (MG32/14FX: CHs
25/26, 27/28; MG24/14FX: CHs 17/18, 19/20)
also support monaural input. Specifically, if you
input only into the L (MONO) jack of either pair
(while leaving the R jack empty), the mixer will
propagate the same signal through both the L
(MONO) and R inputs.
Rear Input/Output Block
2
1 3
N O T E
N O T E
To the INSERT I/O jack
To the input jack of the external processor
To the output jack of the external processor
Ring
Sleeve
Tip
Sleeve Tip
N O T E