Setting the digital output, Turning the hdmi audio on/off, Setup menu – Yamaha DVD-S663 User Manual

Page 36

Setup Menu

Setting the digital output

The [DIGITAL AUDIO] options are:
[DIGITAL OUTPUT] and [LPCM OUTPUT].

In “AUDIO SETUP PAGE”, press

5/a to

highlight [DIGITAL AUDIO], and then
press

Press

5/a to highlight an option.

Press

DIGITAL OUTPUT

Set the digital output according to your
optional audio component connections.

OFF

Select this to turn off the digital output.

ALL

Select this if you have connected the digital
audio output jack to a multi-channel decoder/
receiver.

PCM ONLY

Select this only if your receiver is not capable
of decoding multi-channel audio signals.

• Even if “ALL” is selected, this unit converts

MPEG audio into 2 channel PCM and then
outputs to the connected component.

• When “PCM ONLY“ is selected, DTS digital

signal is muted.

LPCM OUTPUT

Select this if you have connected this unit to a
PCM-compatible receiver via a digital jack,
such as the coaxial jack. In this case, you may
need to adjust [LPCM OUTPUT].
Discs are recorded at a certain sampling rate.
The higher the sampling rate, the better the
sound quality.

48KHz

Select this to play back discs recorded at the
sampling rate of 48 kHz. All 96 kHz PCM data
streams (if available) are converted to the
sampling rate of 48 kHz.

96KHz

Select this to play back discs recorded at the
sampling rate of 96 kHz. If the 96 kHz disc is
copy protected, the digital output is
automatically converted to the sampling rate of
48 kHz. 48 kHz PCM data streams are output at
48 kHz.

Press

5/a to select a setting, and then

press

ENTER

Turning the HDMI audio on/off

When you connect this unit to an HDMI
compatible component via the HDMI jack,
select to turn on or off the HDMI audio output.

•

Select [HDMI AUDIO] in “AUDIO
SETUP PAGE”.

Select this to turn on the HDMI audio output.

OFF

Select this to turn off the HDMI audio output.

• If you are not using the HDMI audio output, set

this to [OFF].

• If the monitor/receiver connected to this unit

using HDMI does not support HDMI audio signal
input, set this to [OFF].

• When audio signals are being output by HDMI-

compatible components, digital signals output at
the coaxial jack of this unit are muted.

• When [DIGITAL OUTPUT] is set to [OFF] on

this unit, HDMI audio signal is not output even if
[HDMI AUDIO] is set to [ON] and an HDMI
connection is established between the monitor
and receiver.

• When [DIGITAL OUTPUT] is set to [ALL] on

this unit, PCM signals are still output if the
monitor and receiver only support the PCM
format. However, the HDMI audio signal is
muted when audio format plays back the DTS
source.

Notes