Zanussi ZMU17MXL - Manual (Page 17)

ZMU17MXL English
19
Drilling on the underside of the cabinet
Using the drilling template, choose the position of the
microwave on the underside of the cabinet. (Position the
front edge of the microwave door so that it is aligned with
the front of the cabinet.) Secure the drilling template with
the help of adhesive tape. Use a sharp pencil to transfer
the markings for drilling.
4. Drill holes using a 5.5 mm drill bit. Remove drilling
dust.
5. Remove the filler plugs on the top of the microwave.
6. Put the microwave in position under the cabinet,
possibly with the assistance of another person.
Secure from the inside of the cabinet using the
screws and the two washers. Tighten the screws
equally.
7. Do not connect the mains plug to the earthed socket
until the microwave is completely firm.
Building In Instructions