Zanussi ZMU17MXL - Manual (Page 16)

ZMU17MXL English
18
d
t d
a
16
19
22
73 mm
76 mm
79 mm
5.5 mm
ø
1. Remove the contents of the cabinet and adjacent
cabinets.
2. Mount the cabinet on the wall, check that it is solid
and measure it. Check the location of mains sockets.
3. The holes may be bored from inside the cabinet or
from the underside of the cabinet.
Drilling inside the cabinet:
Mark the holes inside the cabinet according to the sketch.
The distance
a from the edge of the carcass depends on
the thickness of the front of the cabinet d. Select a value
for a depending on the thickness of the front of your
cabinet, such that the fronts of the microwave and of the
cabinet are aligned.
Building In Instructions