Yamaha T50D - Manual (Page 63)

Maintenance
58
2. Always keep the battery in a good state
of charge. Installing a voltmeter will help
you monitor your battery. If you will not
use the boat for a month or more, re-
move the battery from the boat and store
it in a cool, dark place. Completely re-
charge the battery before using it.
3. If the battery will be stored for longer
than a month, check the specific gravity
of the fluid at least once a month and re-
charge the battery when it is low.
NOTE:
Consult a Yamaha dealer when charging or
re-charging batteries.
EMU29331
Connecting the battery
WARNING
EWM00570
Mount the battery holder securely in a
dry, well-ventilated, vibration-free loca-
tion in the boat. Install a fully charged bat-
tery in the holder.
CAUTION:
ECM01121
● Make sure the main switch (on applica-
ble models) is “
” (off) before work-
ing on the battery.
● Reversal of the battery cables will dam-
age the electrical parts.
● Connect the red battery cable first
when installing the battery and discon-
nect the black battery cable first when
removing it. Otherwise, the electrical
parts can be damaged.
● The electrical contacts of the battery
and cables must be clean and properly
connected, or the battery will not start
the engine.
Connect the red battery cable to the POSI-
TIVE (+) terminal first. Then connect the
black battery cable to the NEGATIVE (-) ter-
minal.
EMU29370
Disconnecting the battery
Disconnect the BLACK cable from the NEG-
ATIVE (-) terminal first. Then disconnect the
RED cable from the POSITIVE (+) terminal.
EMU29390
Checking top cowling
Check the fitting of the top cowling by push-
ing it with both hands. If it is loose have it re-
paired by your Yamaha dealer.
1. Red cable
2. Black cable
3. Battery