beautypg.com

Propeller selection, General information – Yamaha T50D User Manual

Page 15

background image

General information

10

electric system could perform poorly or
be overloaded, causing electric system

damage.

For electric start models, choose a battery
which meets the following specifications.

EMU25711

Battery specifications

NOTE:

The engine cannot be started if battery volt-

age is too low.

EMU25742

Propeller selection

The performance of your outboard motor will
be critically affected by your choice of propel-
ler, as an incorrect choice could adversely
affect performance and could also seriously
damage the motor. Engine speed depends
on the propeller size and boat load. If engine
speed is too high or too low for good engine
performance, this will have an adverse effect
on the engine.
Yamaha outboard motors are fitted with pro-
pellers chosen to perform well over a range
of applications, but there may be uses where
a propeller with a different pitch would be
more appropriate. For a greater operating
load, a smaller-pitch propeller is more suit-
able as it enables the correct engine speed
to be maintained. Conversely, a larger-pitch
propeller is more suitable for a smaller oper-
ating load.

Yamaha dealers stock a range of propellers,
and can advise you and install a propeller on
your outboard that is best suited to your ap-
plication.

NOTE:

Select a propeller which will allow the engine
to reach the middle or upper half of the oper-
ating range at full throttle with the maximum
boat load. If operating conditions such as
light boat loads then allow the engine r/min to
rise above the maximum recommended
range, reduce the throttle setting to maintain

Minimum cold cranking amps (CCA/
SAE):

380.0 A

Minimum marine cranking amps (MCA/
ABYC):

502.0 A

Minimum reserve capacity (RC/SAE):

124 minutes

1. Propeller diameter in inches
2. Propeller pitch in inches
3. Type of propeller (propeller mark)

1. Propeller diameter in inches
2. Propeller pitch in inches
3. Type of propeller (propeller mark)

ZMU04606

-

x

1

2 3

ZMU04607

-

x

1

2 3

This manual is related to the following products: