Zanussi ZDC 47100 W - Manual (Page 21)

21
depth between 48 and 60 cm.
Read carefully the instructions supplied
with the kit.
Door reversal
To make it easier to load or unload the
laundry the door can be reversed.
Reversing the door is not possible if
after this operation the appliance result
installed behind a door with a hinge on
the opposite side to that of the
appliance.
Important:
This operation must be carried out by
qualified personnel.
Please contact the nearest Service
Centre.
Any electrical work required to install this
appliance should be carried out by a
qualified electrician or competent
person.
WARNING:
THIS APPLIANCE MUST BE
EARTHED.
The manufacturer declines any
liability should this safety measure
not be observed.
Important:
Should the appliance power supply
cable need to be replaced, this must
be .carried out by our Service Centre.
Before switching on, make sure the
electricity supply voltage is the same as
that indicated on the appliance’s rating
plate.
The appliance is supplied with a 13amp
plug fitted.
In the event of having to change the
fuse in the plug supplied, a 13amp ASTA
approved (BS1362) fuse must be used.
Should the plug need to be replaced for
any reason, proceed as described
below.
The wires in the mains lead are coloured
in accordance with the following code:
Green and Yellow
- Earth
Blue - Neutral
Brown - Live
Important:
The plug must be accessible after the
appliance has been installed.
Important:
The manufacturer declines any
responsibility for damage or injury
through failure to comply with the
above safety precautions.
GREEN & YELLOW
BROWN
CORD CLAMP
BLUE
13
A
P1041
E
N
L
Electrical connection