ZyXEL Communications ZYAIR B-4000 - Manual (Page 18)

ZyAIR B-4000
17
Figure 21 Advanced Setup Menus
3.4 Resetting the ZyAIR
To reset the ZyAIR back to the factory defaults, click the SYSTEM TOOLS tab, and then the
Default Settings sub-menu to display the screen as shown next.
Figure 22 Default Settings
Select Clear all configuration to reset the system
settings back to the factory defaults (Table 3) and
erase all subscriber account information.
Select Keep subscriber profiles to set the system
configuration back to the factory defaults but retain
subscriber account information. All other custom
configuration is erased.
Click Apply to reset the ZyAIR.
3.5 Test Your Internet Connection
Launch your web browser and navigate to www.zyxel.com. Internet access is just the beginning.
Refer to the User’s Guide for more detailed information on the complete range of ZyAIR features. If
you cannot access the Internet, open the web configurator again to confirm that the Internet settings
you configured in the Wizard Setup are correct.
These are the navigation tabs.
ADVANCED SETUP is selected.
This is the sub-menu panel. These are the
Advanced Setup tab sub-menus.