Xerox WorkCentre Copier-Printer C424 User Manual
User safety
WorkCentre® C2424 Copier-Printer
Copyright © 2005 Xerox Corporation. All Rights Reserved.
A-1
Your system and the recommended supplies have been designed and tested to meet strict safety
requirements. Attention to the following information will ensure the continued safe operation
of your system.
Electrical Safety
■
Use the power cord supplied with your system.
■
Plug the power cord directly into a properly grounded electrical outlet. If you do not know
if an outlet is grounded, ask an electrician to check the outlet.
■
Do not use a ground adapter plug to connect the system to an electrical outlet that does not
have a ground connection terminal.
■
Do not use an extension cord or power strip.
Warning
Avoid the potential of electrical shock by ensuring that the system is properly grounded.
Electrical products may be hazardous if misused.
■
Do not place the system in an area where people might step on the power cord.
■
Do not place objects on the power cord.
■
Do not block the ventilation openings. These openings are provided to prevent overheating
of the system.
■
Do not drop paper clips or staples into the system.
Warning
Do not push objects into slots or openings on the system. Making contact with a voltage
point or shorting out a part could result in fire or electrical shock.
If you notice noises or odors that are not associated with your normal system operation:
1.
Turn off the system immediately
2.
Disconnect the power cord from the electrical outlet
3.
Call an authorized service representative to correct the problem.
User Safety