Zebra Technologies R2844-Z - Manual (Page 22)

Operator Controls
Power Switch
Press up to turn ON or down to turn OFF the printer.
CAUTION • The power should be turned off before connecting or disconnecting the
communications and power cables.
Feed Button
Press once to feed one blank label.
Press once to take the printer out of a “pause” condition. (The printer is put
into “pause” by either a programming command or an error condition.) See
“What the Status Light is Telling You” on page 61.
Use the Feed button for printer setup and status (see “Feed Button Modes”
on page 70).
Status Light
Functions as a printer operational indicator (see “What the Status Light is
Telling You” on page 61).
14 980476-001A