Yamaha YPT-300 - Manual (Page 78)

78
PSR-E303/YPT-300 Owner’s Manual
NOTE:
1 By default (factory settings) the instrument ordinarily
functions as a 16-channel multi-timbral tone generator,
and incoming data does not affect the panel voices or
panel settings. However, the MIDI messages listed
below do affect the panel voices, auto accompaniment,
and songs.
• MIDI Master Tuning
• System exclusive messages for changing the
Reverb Type and Chorus Type.
2 Messages for these control change numbers cannot be
transmitted from the instrument itself. However, they
may be transmitted when playing the accompaniment,
song or using the Harmony effect.
3 Exclusive
F0H, 7EH, 7FH, 09H, 01H, F7H
• This message automatically restores all default set-
tings for the instrument, with the exception of MIDI
Master Tuning.
F0H, 7FH, 7FH, 04H, 01H, ll,
mm, F7H
• This message allows the volume of all channels to
be changed simultaneously (Universal System
Exclusive).
• The values of “mm” is used for MIDI Master Volume.
(Values for “ll” are ignored.)
F0H, 43H, 1nH, 27H, 30H, 00H,
00H, mm, ll, cc, F7H
• This message simultaneously changes the tuning
value of all channels.
• The values of “mm” and “ll” are used for MIDI Master
Tuning.
• The default value of “mm” and “ll” are 08H and 00H,
respectively. Any values can be used for “n” and “cc.”
F0H, 43H, 1nH, 4CH, 02H, 01H, 00H,
mmH, llH, F7H
• mm : Reverb Type MSB
• ll : Reverb Type LSB
Refer to the Effect Map (page 78) for details.
F0H, 43H, 1nH, 4CH, 02H, 01H, 20H,
mmH, llH, F7H
• mm : Chorus Type MSB
• ll : Chorus Type LSB
Refer to the Effect Map (page 78) for details.
4 When the accompaniment is started, an FAH message
is transmitted. When accompaniment is stopped, an
FCH message is transmitted.When the clock is set to
External, both FAH (accompaniment start) and FCH
(accompaniment stop) are recognized.
5 Local ON/OFF
Bn, 7A, 7F
Bn, 7A, 00
Value for “n” is ignored.
■
Effect map • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
* When a Type LSB value is received that corresponds to no effect type, a value correspond-
ing to the effect type (coming the closest to the specified value) is automatically set.
* The numbers in parentheses in front of the Effect Type names correspond to the number
indicated in the display.
● REVERB
● CHORUS
TYPE
MSB
TYPE LSB
0 1 2 8 16 17 18 19 20
0 No Effect
1 (01)Hall1 (02)Hall2 (03)Hall3
2 Room (04)Room1 (05)Room2
3 Stage (06)Stage1 (07)Stage2
4 Plate (08)Plate1 (09)Plate2
5...127 No Effect
TYPE
MSB
TYPE LSB
0 1 2 8 16 17 18 19 20
0...63 No Effect
64 Thru
65 Chorus (2)Chorus2
66 Celeste (1)Chorus1
67 Flanger (3)Flanger1 (4)Flanger2
68...127 No Effect
MIDI Data Format