ZyXEL Communications P-871M - Manual (Page 9)

9
P-871M User’s Guide
3 Firmware Upgrade
This section shows you how to upload firmware via the
console port.
vdsl debug Displays VDSL debugging information.
vdsl show Displays the VDSL status and performance
data.
vdsl active
[on|off] Displays the VDSL port status or enables/
disables the VDSL port.
enet auto
[on|off] Displays or sets auto-negotiation mode.
enet speed
[10|100] Displays or sets the Ethernet port speed (10 or
100 Mbps).
enet duplex
[full|half] Displays or sets the Ethernet duplex mode.
enet fctrl
[on|off] Displays or sets flow control.
enet status Displays the Ethernet port statistics.
enet clear Removes the Ethernet port statistics.
Command Description