ZyXEL Communications P-871M User Manual
Page 8
P-871M User’s Guide
8
Command
Description
sys
Displays the system information and port
settings, including the current firmware version
and VDSL data rate.
lt=line termination, means CO mode;
nt=network termination, means CPE mode
help
Displays all available commands.
exit
Logs you out of the CLI.
passwd
Changes the system login password.
default
Returns the P-871M to the factory defaults.
upgrade
Uploads the P-871M’s firmware or
configuration file.
vdsl uprate [x]
Displays or sets the VDSL upstream data rate.
x
: Enter the rate from 2000 to 100000 in Kbps.
vdsl downrate
[y]
Displays or sets the VDSL downstream data
rate.
y
: Enter the rate from 2000 to 100000 in Kbps.
vdsl snr [z]
Displays or sets the VDSL SNR margin.
z
: Enter the SNR margin from 0 to 24 in dB.
vdsl interleave
[i]
Displays or sets the VDSL interleave delay.
i
: Enter the interleave delay from 0 to 100 in
0.5 ms (milisecond).
vdsl profile
[1|2]
Displays or sets the VDSL profile.
1
: 12a, PSD:998-M1x-B
2
: 12a, PSD:997-M1x-M
vdsl reset
Resets the VDSL chipset.
vdsl reconnect
Forces the P-871M to re-build up the VDSL
connection.