ZyXEL Communications NSA-2400 - Manual (Page 2)

NSA-2400 Quick Start Guide
2
Overview
The NSA-2400 (the NSA) is a network storage
device for file sharing, data backup and data
protection in small (home) offices and/or
medium-sized offices.
This guide shows you how to:
1 Install hard drives
2 Make NSA Connections
3 Access the NSA using NDU (NSA
Discovery Utility) or your web browser
4 Set up the NSA using the wizard
5 Map the NSA to a network drive from any
computer
Note: See the User’s Guide for more details and specifications on the NSA.
Requirements
You need the following before you start:
• NSA
• Included CD containing the NDU (NSA Discovery Utility) and Genie Backup Manager
• Power cord and power supply (external)
• 8-wire Ethernet cable for Gigabit Ethernet
• Up to four SATA-1 (Serial Advanced Technology Attachment) compatible hard disk(s) with 15-pin SATA power
connectors
• Screwdriver to install the hard disks in the disk trays
• USB cable (optional: you only need this if you want to expand storage capacity by connecting compatible USB
drives (version 2))
• Computer with Network Interface Card (NIC) and TCP/IP installed
• Network access device such as a switch or hub.
1 Install Hard Drives
Note: Hard drives are NOT hot swappable. The NSA must be turned off before you remove or install
hard drive(s).
1 Pull the tab on the left of the front door of the NSA to open it.