ZyXEL Communications Bridge/Router G-2000s - Manual (Page 13)

ZyAIR G-2000 Plus Quick Start Guide
13
The management session automatically times out when the time period
set in the Administrator Inactivity Timer field expires (default five minutes).
Simply log back into the ZyAIR if this happens to you.
4.2 Common Screen Command Buttons
The following table shows common command buttons found on many web configurator screens.
Back Click Back to return to the previous screen.
Apply Click Apply to save your changes back to the ZyAIR.
Reset Click Reset to begin configuring this screen afresh.
5 Configuring the ZyAIR Using the Wizard
The wizard consists of a series of screens to help you configure your ZyAIR for wireless stations to access
your wired LAN. Refer to your User’s Guide for more background information.
1. Click WIZARD SETUP to display the first wizard screen. Refer to your User’s Guide for more
background information on each field.
System Name is a unique
name to identify the ZyAIR
in an Ethernet network.
Enter a descriptive name
Enter a Domain Name if
your ISP requires a domain
name for authentication;
otherwise leave it blank.
Click Next to continue
2. Use the second wizard screen to set up the wireless LAN.