Yamaha CRW2200IX - Manual (Page 34)

Troubleshooting
26
No sound of CD-DA (audio CD) disc is audible.
● Check that the LINE OUT jacks (L/R) of the CRW2200IX drive is connected
correctly to the sound card or powered speakers. (→P. 10)
● For users with Windows Me, no sound is audible from headphones connected to
the headphone jack of the CRW2200IX drive or from powered speakers
connected to the LINE OUT jacks (L/R) on the rear panel of the CRW2200IX
drive.
Make sure settings are as shown below.
(When you are using Windows Media Player 7.0 with Windows Me, the above
symptom is known to exist because the default setting is set to ON for “Digital
playback.”)
1 The “Properties” setting of the CRW2200IX drive.
➀ Open the “YAMAHA CRW2200E Properties” window and click on the
“Properties” tab.
➁ Uncheck the “Enable digital CD audio for this CD-ROM device.” check box.
2 The setting of the Windows Media Player.
➀ Start “Windows Media Player.”
➁ Click “Tools” on the Menu and click on “Options” to open the “Options”
window, then click on the “CD Audio” tab.
➂ Uncheck the “Digital playback” check box.
00GB-.book Page 26 Wednesday, June 27, 2001 7:24 PM