Troubleshooting – Yamaha CRW2200IX User Manual
Page 31
23
Troubleshooting
Please refer also to the YAMAHA CD-R/RW Drive web site for more information.
YAMAHA CD-R/RW Drive web site
URL: http://www.yamaha.co.jp/english/product/computer/
Europe
URL: http://www.yamaha-it.de/
The drive does not turn on.
● Are the AC adapter and the power cable connected correctly?
Make sure that the CRW2200IX drive is properly connected to the AC outlet
using the included AC adapter and power cable. (→P. 13, 14)
● Make sure that the rear panel power switch is set to “ON.” As long as the LED on
the front panel lights up or blinks in green or orange, the drive is successfully
turned on. The problem may not be with the hardware (→P. 25). If the LED
doesn’t light up or blink, consult your nearest Yamaha dealer for repair.
The computer does not start up.
● Is the IEEE1394 interface card installed correctly?
Refer to the documentation that came with the card for details.
The CRW2200IX drive is not recognized by the operating system.
● Is the drive properly connected to the computer using a verified good IEEE1394
interface cable?
Make sure the interface cable is fully connected at both ends. (
→
● Does the IEEE1394 interface (bus interface) appear in the operating system’s
information window?
Make sure that the IEEE1394 interface is recognized by the operating system.
(
→
If not, refer to the documentation that came with the IEEE1394 interface card or
read the documentation that came with your computer for a built-in type
IEEE1394 interface. Consult the manufacturer of your (add-on or built-in)
IEEE1394 interface for possible solutions.
If the operating system recognizes the IEEE1394 interface, but the CRW2200IX
drive is not recognized, consult your nearest Yamaha dealer for repair.
00GB-.book Page 23 Wednesday, June 27, 2001 7:24 PM