Xerox 4635 - Manual (Page 35)

CLIENT WORKSTATIONS
XEROX DOCUPRINT 96/4635/180 NPS SYSTEM OVERVIEW GUIDE 5-3
Job status feedback
Client workstations display fault messages and additional
information, such as the status of feeder trays and output bins. If
properly configured, the workstations may be able to display job
status, as shown below.
To determine the status of jobs submitted using the lpr command,
you must issue an lpq command at the command line. Some
application software packages may provide a simplified means of
obtaining job status, perhaps using icons.
Digital
Equipment
Corporation
DECstation ULTRIX Optional
Ethernet
interface TCP/IP;
none Print directly from application,
or use the lpr command or
Xerox Client Software.
Apple
Macintosh Apple OS Optional
Ethernet
interface AppleTalk using
EtherTalk Phase I or
II; none Print directly from application or
use Xerox DocuPrint Print
Submission Client software for
the Macintosh.
IBM RS/6000 IBM AIX Standard TCP/IP;
none Print using Xerox Client
Software.
HP/Apollo HP-UX Standard TCP/IP;
none Print using Xerox Client
Software.
Table 5-1. DocuPrint NPS clients
Client
workstation
hardware
Operating
system Ethernet
connection
Protocol;
Translation
requirements
Job submission method
Table 5-2. DocuPrint job status feedback
Platform Job status capability
Sun Workstation Job status and job deletion are available by issuing the appropriate
command at the command line.
Job status information is available for jobs submitted using Xerox
Client Software.
IBM and compatible
personal computers Job status and job deletion are available depending on the TCP/IP
software installed on the workstation. You must issue the appropriate
command at the command line.
Job status information is available for jobs submitted using Xerox
Client Software.
Job status information is available using the Novell PCONSOLE
utility if DocuPrint is configured with a RPRINTER or PSERVER
implementation.
Apple Macintosh Job status information is available at the workstation through
AppleTalk.
IBM RS/6000 and HP/
Apollo Job status information is available for jobs submitted using Xerox
Client Software or Ipstat (native utility).