Zoom Dialer 26 - Manual (Page 6)

6 Dialer Installation & User’s Guide
Setting Up the Dialer
If you want to share your dialer among people who will
use different calling cards, please read the section
Advanced LearnMode (page 8) for instructions on how to
set up dialer keys. Otherwise please read about
LearnMode below.
LearnMode
You only have to do LearnMode once for each calling card.
The dialer will route all appropriate numbers once you
have completed LearnMode.
You may use your calling card in one of three ways.
• If you will use your calling card for North American
toll calls only, follow the instructions below for North
American Calling.
• If you will use your calling card for calls going
outside North America only, follow the instructions
on page 7 for Calls Going Outside North America.
• If you will use your calling card for both, follow the
instructions under North American Calling, and then
follow the instructions for calls going outside North
America on page 7. (Note: You may use a different card
for domestic and international calling.)
North American Calling
To set up LearnMode
for these calls, do the following:
1. Take your phone off-hook
2. Press # 1
3. Wait for dial tone
4. Make a North American toll call using your calling
card
5. Listen for two confirmation beeps
6. Let your call go through, OR Hang up, as you prefer.
The dialer will learn the access number, PIN, and any
other required numbers as you make your call.