Zoom Dialer 26 - Manual (Page 3)

Getting Started 3
Getting Started
Thank you for purchasing our dialer. Before you begin
installing it, you should read the section below.
How the Dialer Works
The dialer simplifies using calling cards by dialing all the
extra numbers automatically. When you first install the
dialer, or when you get a new prepaid phone card, you set
up the dialer using LearnMode
™ . You can use the dialer in
one of two basic ways:
1) Automatic Mode: If you want the dialer to
automatically route all North American or
international toll calls using your prepaid phone card;
or
2) Manual Mode: If you only want the dialer to route calls
using your prepaid phone card when you come off-
hook and dial *. The dialer assumes you want Manual
Mode unless you use a command to select Automatic
Mode.
There is a special kind of Manual Mode that lets you
assign keys for up to seven different users or calling cards.
Setting up and using the dialer involves these easy steps:
1. Install the dialer.
2. Once the dialer is installed, use LearnMode or
Advanced LearnMode™ to teach your dialer how to
make calls using your calling card.
3. If you wish, use Settings to tailor the dialer to your
desired use. For instance, you can select Automatic
Mode and change the DTMF tone settings.
4. Use the dialer.