Zoom Dialer 26 - Manual (Page 13)

Settings 13
area codes that includes all area codes in your local
telephone area called a “LATA.” The dialer does not route
to these area codes.
If you want to add to the list of area codes that the dialer
won’t route to (will pass through), take your phone off-
hook and dial
#6 ####
where are the area codes that you want the dialer to
pass through. For example:
#6 212 # 408# 314 ##
You may enter up to three area codes with each
command. You can enter the command multiple times to
pass through more than three area codes, up to a total of
about 350 area codes.
If you want to remove an area code from the list that the
dialer won’t route to, take your phone off-hook and dial
#7 ##
In some cases, you may want to specify how to treat
individual exchanges within an area code. For example,
you may live close to the boundary of an area code. Calls
to most exchanges in that area code may be toll calls that
you want the dialer to route. However, some exchanges in
that area code may be included in your local calling area.
You can tell the dialer to pass through calls to those
exchanges by taking your phone off-hook and dialing
#6* # # # ##
where is the area code, and are the
exchanges within the area code.
You may enter three exchanges with each command. You
can enter the command multiple times to pass through
more than three exchanges, for a total of about 350.
You can remove exchanges from the do not route list by
taking your phone off-hook and dialing
#7* # ##
Note that the total number of area codes and exchanges
passed through is limited to about 350.