T) connection, see “completing the windows nt – Xerox 5750 User Manual
Page 56
44
Installing user software on a Windows computer
Completing the Windows NT 4.0 TCP/IP connection
Complete the setup for the TCP/IP and lpr connection as follows:
• Prepare the DocuColor to accept print jobs using TCP/IP and lpr protocols.
• Configure the workstation for the TCP/IP connection.
Before you continue, ask the system administrator for the IP address assigned to the
DocuColor, as well as the subnet mask and the gateway address, if they are used.
T
O
PREPARE
THE
D
OCU
C
OLOR
FOR
TCP/IP
AND
LPR
PRINTING
:
1.
With the DocuColor turned off, connect it to the network.
2.
Turn on the DocuColor and from the Control Panel, select PRINTER SETUP. Confirm that
one of the queues is enabled.
3.
Select NETWORK SETUP. Enable TCP/IP and enter the appropriate settings for
IP address, subnet mask and gateway address.
For details, see the Administrator Guide.
4.
Exit NETWORK SETUP and save changes.
The DocuColor reboots.
The TCP/IP Protocol and Microsoft TCP/IP printing services must already be
installed on the Windows NT workstation.