ZyXEL Communications P-2002 - Manual (Page 95)

P-2002 Series User’s Guide
Chapter 12 Troubleshooting 95
C
H A P T E R
12
Troubleshooting
This chapter covers potential problems and the corresponding remedies.
12.1 Problems Starting Up the Prestige
12.2 Problems with the LAN or PC LED
Table 33 Troubleshooting the Start-Up of Your Prestige
PROBLEM CORRECTIVE ACTION
None of the
LEDs turn on
when I turn on
the Prestige.
Make sure that the Prestige’s power adaptor is connected to the Prestige and an
appropriate power source. Check that the power source is turned on.
Disconnect the Prestige’s power and reconnect it.
If the error persists, you may have a hardware problem. In this case, you should
contact your vendor.
Table 34 Troubleshooting the LAN or PC LED
PROBLEM CORRECTIVE ACTION
The LAN or PC LED
does not turn on.
Check your Ethernet cable connections and type (refer to the Quick Start Guide
for details).
Check for faulty Ethernet cables.
Make sure your computer’s Ethernet card is working properly.