beautypg.com

3 f/w upload screen, Table 30 system status – ZyXEL Communications P-2002 User Manual

Page 86

background image

P-2002 Series User’s Guide

86

Chapter 10 Maintenance

The following table describes the labels in this screen.

10.3 F/W Upload Screen

Find firmware at

www.zyxel.com

in a file that (usually) uses the system model name with a

"*.bin" extension, e.g., "Prestige.bin". The upload process uses HTTP (Hypertext Transfer
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.
Click MAINTENANCE in the navigation panel and then the F/W UPLOAD tab. Follow the
instructions in this screen to upload firmware to your Prestige.

Table 30 System Status

LABEL

DESCRIPTION

System Name

This is the System Name you chose in the SYSTEM General screen. It is for

identification purposes

Model Name

The model name identifies your device type. The model name should also be on a

sticker on your device. If you are uploading firmware, be sure to upload firmware

for this exact model name.

ZyNOS Firmware

Version:

This is the ZyNOS firmware version and the date the firmware was created.

ZyNOS is ZyXEL's proprietary Network Operating System.

Ethernet Port

IP Address

This is the Prestige’s IP address. This applies to both of the Prestige’s Ethernet

ports.

IP Subnet Mask

This is the Prestige’s subnet mask. This applies to both of the Prestige’s Ethernet

ports.

MGNT Port

IP Address

This is the static IP address of the Prestige’s logical Ethernet interface for

management.

IP Subnet Mask

This is the subnet mask of the Prestige’s logical Ethernet interface for

management.

VoIP Status

SIP1/SIP 2

This is the SIP account configured on the Prestige.

SIP Registration

Status

This is the SIP registration status of the SIP account.
This field displays Registered when the Prestige has successfully registered the

SIP account with the SIP register server.
This field displays Not Registered when the Prestige has not successfully

registered the SIP account with the SIP register server.

Register/

Unregister

Click Register to have the Prestige attempt to register the SIP account with the

SIP register server.
Click Unregister to delete the SIP account's registration on the SIP register

server. This removes the SIP registration server's SIP identity-to-IP address (or

domain name) mapping for this SIP account, it does not cancel your SIP account.

Used Port

This field displays the Prestige’s listening port for SIP traffic on this SIP account.

Custom Tone

(IVR) Status

IVR (Interactive Voice Response) is a feature that allows you to use your

telephone to interact with the Prestige. You can use your phone to record custom

tones for the caller ringing and on hold tone functions. This field displays the

Remaining Time left for recording custom tones.