Xerox 701P28020 - Manual (Page 35)

X e r o x N u v e r a P a p e r G u id e 3-1
Ti ps b y s t o c k t y p e
3. Tips by stock type
This chapter offers tips for running common types of stock in your
Xerox Nuvera Production or Perfecting System. Tips that apply to
all stocks appear first (Table 3-1.) and are followed by tips for
specific types of stocks. The following stock types are a
combination of:
• Stock attributes
• Specialty stocks
• Stock grades (used in North American only)
NOTE: Stocks are divided into grades according to their end use,
method of printing, and pulp content. Paper grades may not be
consistent among paper manufacturers and vendors.
Xerox Nuvera MX: Special considerations
The Xerox Nuvera MX system uses special MICR toner. Because
of this special use toner, the Nuvera MX does not support printing
on the following stock types:
• DocuCard
• DocuClient
• Never-tear
• Super-gloss
• Teslin
• Transparencies
• Coated stocks (silk or gloss) over 140 gsm
Stock types
The stock types covered in this section include:
• All stocks (Tips that apply to all stocks)
• Bond (56 to 158 gsm)
• Bristol (147 to 220 gsm)
• Carbonless
• Cover coated (140 to 220 gsm)
• Cover uncoated (106 to 220 gsm)