ZyXEL Communications G-202 - Manual (Page 48)

ZyXEL G-202 User’s Guide
48 Chapter 4 Wireless Station Mode Configuration
The following table describes the labels in this screen.
4.3.1.3 WPA/WPA2
Figure 27 Station Mode: Security Settings: WPA/WPA2
The following table describes the labels in this screen.
Table 7 Station Mode: Security Setting: WPA-PSK/WPA2-PSK
LABEL DESCRIPTION
Encryption Type The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses
a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to
Section 3.2.3.3 on page 36 for more information.
Pre-Shared Key Type a pre-shared key (same as the AP or peer device) of between 8 and 63 case-
sensitive ASCII characters (including spaces and symbols) or 64 hexadecimal
characters.
Back Click Back to go to the Site Survey screen to select and connect to another
network.
Next Click Next to confirm your selections and advance to the Confirm Save screen.
Refer to Section 4.3.2 on page 50 .
Exit Click Exit to return to the Site Survey screen without saving.
Table 8 Station Mode: Security Setting: WPA/WPA2
LABEL DESCRIPTION
Encryption Type The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses
a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to
Section 3.2.3.3 on page 36 for more information.
Authentication
Type
The type of authentication you use depends on the RADIUS server or AP.
Select an authentication method from the drop down list. Options are TLS and
PEAP.
Login Name Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.