Yamaha AX-9 - Manual (Page 11)

11
English
TO RECORD A SOURCE TO TAPE (OR MD)
When you listen with headphones
Connect the headphones to the PHONES jack. When listening
with headphones privately, set both the SPEAKERS A and B
switches to the OFF position.
PHONES
STANDBY/ON
SLEEP
TAPE MONITOR PURE DIRECT
PHONES SPEAKERS
ON
OFF
A B
ON
OFF
PURE
DIRECT
TAPE
MONITOR BASS TREBLE BALANCE
L R
0
VOLUME INPUT
0 l0
CD MD TAPE TUNER AUX
– – + +
PHONO
0
NATURAL SOUND STEREO AMPLIFIER AX 9 l
1 2
4
1
Select the source to be recorded.
2
Play the source and then turn the VOLUME control up
to confirm the input source.
3
Begin recording on the tape deck (or MD recorder etc.)
connected to this unit.
4
If the tape deck connected to the TAPE terminals on the
rear of this unit is used for recording, you can monitor
the sounds being recorded by pressing TAPE
MONITOR so that TAPE MONITOR indicator lights up.
Notes
The settings of the VOLUME, BASS, TREBLE, BALANCE
controls and PURE DIRECT switch have no effect on the
material being recorded.
TAPE
MONITOR
TAPE
MONITOR
Lights up.
INPUT
CD MD TAPE TUNER AUX PHONO
0 l0
VOLUME